When you scheduled your brow lamination, you were probably so excited to see the results. Many people rave about brow laminations and love how their brows look after the procedure. However, not everyone is completely satisfied with their results. In fact, some find themselves saying, “I hate my brow lamination!” If this describes you, continue reading to learn more about the options you have to help you fix or reverse the lamination.
Table of Contents
- What is a Brow Lamination?
- How long does brow lamination last?
- Eyebrow Lamination Risks
- Do Your Brows Go Back to Normal After a Brow Lamination
- Ways to Reverse a Brow Lamination
- If You Hate Your Brow Lamination, It’ll Be OK!
- FAQs
What is a Brow Lamination?
If your eyebrows grow downward, you may be considering this procedure.
A brow lamination is sort of like a perm for your eyebrows. The perm solution is used to lift and straighten the brows to give them a fuller and more defined shape.
During a brow lamination procedure, the first step is to apply the perm solution to break the bonds of the hair, allowing the technician to re-set their shape. Then, a neutralizer is applied to the hairs to restore the bonds and keep them in place.
How long does brow lamination last?
A brow lamination will typically last between 4 and 6 weeks. In some cases, the lamination could last up to 8 weeks.
The length of time the lamination will last depends on how well you care for your eyebrows and follow the instructions given to you by the brow artist you worked with.
Eyebrow Lamination Risks
Does brow lamination ruin your brows? It is unlikely that a brow lamination will completely ruin your eyebrows, but there are some risks associated with getting an eyebrow lamination.
One potential side effect is overprocessing. If the lamination isn’t performed correctly and your brows end up overprocessed, they won’t look right. The hairs can end up curling in different directions. They may also look frizzy or like they have chemical burns.
Not only will an overprocessed brow lamination look off, it can also cause greater damage to your hairs. The overprocessed hairs will be weaker and more prone to breakage. They are also more likely to fall out, leaving you with bald spots.
A brow lamination may also irritate the skin around your eyebrows.
Brow laminations use a perm solution, which is formulated with several different chemicals. Some people have an allergic reaction to perm solutions. This can lead to itchy, irritated, or red skin around the eyes. In some cases, the area around the eyes may even become swollen.
Do Your Brows Go Back to Normal After a Brow Lamination
Do brows go back to normal after brow lamination?
Yes, the results of a brow lamination are not permanent. After 4 to 8 weeks, your brows should return to their original shape and appearance.
Can you reverse laminated brows?
What happens if I don’t like my brow lamination? Can I remove my brow lamination?
Not being happy with a procedure you spent your hard-earned money on is not a fun place to be.
If you’re not happy with your brow lamination, there are some things you can do to try to reverse it. We’ll get into some of the options to try in the next few sections.
Ways to Reverse a Brow Lamination
If you’re really unhappy with how your brow lamination turned out, you may be ready to call it quits on the whole thing. If you want to do what you can to reverse the results, follow the tips shared below.
You’ll want to act quickly to do what you can to reverse the process. The longer you wait, the more time the chemicals will have to set in, and the more difficult it will be to change the appearance of your eyebrows.
One final note before getting into some steps you can take to reverse your brow lamination: strong chemicals are used to laminate eyebrows. These chemicals are designed to keep the eyebrows in place and are not meant to be easily removed. They can also increase the chances of damage to your eyebrows. If you’re not careful, you could cause additional damage to your brows.
For this reason, you’ll want to be extra careful to avoid making the situation worse.
Contact the Brow Artist Who Performed the Procedure
If you’re dealing with a brow lamination gone wrong, try to reach out to the brow artist who laminated your brow.
Most professionals want their clients to be satisfied with their results. If they hear that you hate how your lamination looks, they may offer to reverse it or help you reshape the brow more to your liking.
Wash Your Eyebrows
After your brow lamination was complete, your technician likely told you to avoid getting your eyebrows wet for 1 to 2 days. They told you this because exposure to water in the first 24 to 48 hours can interact with the chemicals and cause your brows to lose their shape.
So, when you’re looking for how to get rid of brow lamination at home, you should try to wash your eyebrows. This will be most effective if you do it as quickly as possible. As more time passes, the chemical bonds will strengthen, locking your brows into place.
Brush Your Eyebrows
Another piece of advice your brow technician gave was probably to avoid brushing your eyebrows for the first 1 to 2 days.
Therefore, if you want to know how to get rid of brow lamination, you can ignore this advice and try to use an eyebrow brush to brush your brows. This can help weaken the bonds and move your brows back into a more natural position.
Use Eyebrow Conditioner
Trying eyebrow conditioner may be a good choice for those looking for how to fix over processed brow lamination. Applying an eyebrow conditioner can provide more moisture to your brows and make them feel softer.
If you’re more annoyed by the brittle hairs than the actual shape of the brow lamination, this may be the best option for you.
Try a Chemical Exfoliant
Do you feel your brow lamination too thick and doesn’t look right? Using an AHA or BHA chemical exfoliant may be able to help you reverse the results.
These exfoliants are typically on the no-no list after getting a brow lamination because they can stop the chemicals from setting correctly.
However, if you want to undo the lamination, this is actually what you want.
Wait it Out
The final option is one that you may not like; however, it is often the best and safest choice.
If you’re not happy with your brow lamination, you may just have to wait it out. Remember, that a brow lamination can make it more likely for your hairs to become damaged, so trying to reverse the process carries risks with it.
Most brow laminations only last between 4 and 6 weeks, which isn’t really all that long. Waiting for the lamination to wear off carries fewer risks than trying to reverse it.
If You Hate Your Brow Lamination, It’ll Be OK!
If you feel like you weren’t fully prepared for your brow lamination and what the finished results would look like, don’t panic. You’re not the first to be unsatisfied, and you won’t be the last.
You can try to reverse the lamination using one of the tips shared above, or reach out to the technician who performed the procedure to see if they can work with you to ensure that you are happy with how your eyebrows look.
Just take a deep breath, and don’t let yourself get too worried throughout the process.
You can also try concealing your brow while you wait out its lamination, so you can check out the best concealers for eyebrows next!
FAQs
Does brow lamination ruin your brows?
It is possible to cause damage to your eyebrows when you get a brow lamination. Particularly with repeated procedures, you run the risk of drying out or damaging your eyebrows when you get them laminated. No amount of castor oil can help your eyebrows. Always wait at least six weeks between procedures to limit the risk of damage.
Does eyebrow lamination cause baldness?
It is possible to lose eyebrow hairs after getting them laminated. The procedure can cause damage to your hairs and make them weaker and more prone to breakage. If several of your eyebrow hairs are affected, it could potentially lead to baldness in some areas.
How do you fix frizzy brow lamination?
If your brow lamination turned out too frizzy, the best choice may be to contact the technician who performed the procedure to see if they can help you fix it. You may also want to request a keratin brow lamination, which uses Cysteine. Cysteine increases the pH of the eyebrows, which allows for easier molding without increasing frizziness.
Alternatively, you could try washing your brows as quickly as possible or brushing them out. If performed shortly after your lamination, these steps could help reverse the lamination and return your brows to normal.
Why do my eyebrows feel hard after brow lamination?
An eyebrow lamination uses different chemicals to change the appearance of your eyebrows. These chemicals can also impact the way your brows feel, making them feel harder. Some have shared that their eyebrows felt like straw after getting them laminated. Your technician may recommend oiling your brows to help them stay smoother and softer.
